| 1. |
2024
Lin Chun Hao,Wu Jeffrey,Hsu Ting Shuo,Hsieh Yueh Ying,Chiang Chang Jung,Chen Chia Hsien,Lin Chun Hao,Wu Jeffrey,Hsu Ting Shuo,Hsieh Yueh Ying,Chiang Chang Jung,Chen Chia Hsien.
Full Endoscopic Paramedian Partial Lumbar Corpectomy for a Lumbar Burst Fracture With Spinal Canal and Foraminal Stenosis: A Case Report With a Technical Note
. Journal of Minimally Invasive Spine Surgery and Technique
.2024
;(9):S34-S40
|
|
| 2. |
2023
Wu Lien Chen,Hsieh Yueh Ying,Chen IChun C.,Chiang Chang Jung.
Life-threatening perioperative complications among older adults with spinal metastases: An analysis based on a nationwide inpatient sample of the US
. Journal of Geriatric Oncology
.2023
;(14)
|
|
| 3. |
2023
Wu Lien Chen,Hsieh Yueh Ying,Tsuang Fon Yih,Kuo Yi Jie,Chen Chia Hsien,Chiang Chang Jung.
Pullout strength of different pedicle screws after primary and revision insertion: an in vitro study on polyurethane foam
. BMC Musculoskeletal Disorders
.2023
;(24)
|
|
| 4. |
2023
Wu Lien Chen,Hsieh Yueh Ying,Tsuang Fon Yih,Kuo Yi Jie,Chen Chia Hsien,Chiang Chang Jung.
Pullout Strength of Pedicle Screws Inserted Using Three Different Techniques: A Biomechanical Study on Polyurethane Foam Block
. Bioengineering
.2023
;(10)
|
|
| 5. |
2022
Chiang Chang Jung,Hsieh Yueh Ying,Tsuang Fon Yih,Chiang Yueh Feng,Wu Lien Chen.
Assessment of Spinal Stability after Discectomy Followed by Annulus Fibrosus Repair and Augmentation of the Nucleus Pulposus: A Finite Element Study
. Applied Sciences (Switzerland)
.2022
;(12)
|
|
| 6. |
2022
Wu LC,Hsieh YY,Tsuang FY,Kuo YJ,Chiang CJ.
Cutting Flute and Thread Design on Self-Tapping Pedicle Screws Influence the Insertion Torque and Pullout Strength
. Applied Sciences
.2022
|
|
| 7. |
2021
Hsieh Yueh Ying,Wu Lien Chen,Tsuang Fon Yih,Chen Chia Hsien,Chiang Chang Jung.
Pull-out capability of a 3d printed threadless suture anchor with rectangular cross-section: A biomechanical study
. Applied Sciences (Switzerland)
.2021
;(11)
|
|
| 8. |
2021
Hsieh YY,Wu LC,Fon Yih Tsuang,Chen CH,Chiang CJ.
Pull-Out Capability of a 3D Printed Threadless Suture Anchor with Rectangular Cross-Section: A Biomechanical Study
. Applied Sciences
.2021
|
|
| 9. |
2020
Hsieh YY,Kuo YJ,Chen CH,Wu LC,Lin CL,Chiang CJ.
Biomechanical assessment of vertebroplasty combined with cement-augmented screw fixation for lumbar burst fractures: A finite element analysis
. Applied Sciences
.2020
|
|
| 10. |
2020
Hsieh YY,Tsuang FY,Guo YJ,Chen CH,Lin CL,Chiang CJ.
Biomechanical analysis of single-level interbody fusion with different internal fixation rod materials: a finite element analysis
. BMC Musculoskeletal Disorders
.2020
|
|
| 11. |
2017
Hsieh YY,Chen CH,Tsuang FY,Wu LC,Lin SC,Chiang CJ.
Removal of fixation construct could mitigate adjacent segment stress after lumbosacral fusion: A finite element analysis
. Clinical Biomechanics
.2017
|
|
| 12. |
2017
Tsuang FY,Hsieh YY,Kuo YJ,Chen CH,Lin FH,Chen CS, Chiang CJ.
Assessment of the suitability of biodegradable rods for use in posterior lumbar fusion: an in-vitro biomechanical evaluation and finite element analysis
. applied science
.2017
|
|